Navien CH-210 Operation Manual

Combination water heater operation
16
█ Hot Water Temperature Setting
If the DHW button is pressed, „hot
water‟ icon flickers and temperature
of hot water (86~120℉) is displayed.
If temperature over 120℉ is needed,
DHW and Heating button shall be
pressed simultaneously. Then user
can adjust set temperature of hot
water up to 140℉
When the „hot water‟ icon flickers turn
the dial to set desire hot water
temperature. After a few seconds, the
desire temperature is saved and get
back to the previous function.
OPERATING INSTRUCTIONS

Navien CH-210 Specifications

General

Brand	Navien
Model	CH-210
Category	Water Heater
Language	English