Combination water heater operation
█
Heat Capacity Control
When the heating capacity is small, the desired heat capacity can be controlled by the
use of the remote controller.
Tap “ON/OFF” to turn off the power of
the remote controller.
With the remote Controller off, press
and hold the “DHW” and “Stand By”
button simultaneously for 3 seconds.
The black cursor should make 1
revolution around the clock and the
heat capacity will be displayed on the
right hand side of the clock.
Use the center dial to adjust the heat
capacity. (Range 30 ~ 100 %)
Press “Program” button to complete
setting. If setting is completed Remote
Controller will return “OFF” state.
To Next Page
Loading...
Need help?
General
