To Next Page

To Previous Page

X350 and X550 User Manual

Page 4

Safety Information

Refer to the following to prevent any physical injury or loss of assets caused by damage

to the product.

A user must read this User Manual carefully before use and properly follow the

instructions.

 Make sure that the place of installation is not too hot (above 35˚C), too cold

(below 0˚C) or too wet (above 85% relative humidity).

 Avoid any severe impacts to the product.

 Make sure that the product is not exposed to direct sunlight or any hot

machinery.

 Please keep the product away from any items which have strong magnetic

properties.

 Do not disassemble, repair or rebuild the product.

 Please properly route all cables and power cords to avoid a tripping hazard. An

electric shock, fire, damage to the product or physical injury may occur as a

result of tripping over the cable.

Please disconnect the Cat 5e or Cat 6 cable from the product when it is not in use

for a long period of time.

NComputing X350 User Manual

Other manuals for NComputing X350