X350 and X550 User Manual
Page 10
Install the Hardware
Before attempting to install the X350/X550 kit, verify that your Windows or Linux OS is
supported by vSpace, and that the OS is properly installed, updated and all devices
viewable in the OS device manager are working properly. Also, check to be sure your
package includes one X550 (or X350) PCI card, five (or three) XD2 devices, the vSpace
installation CD, and ten (or six) monitor mounting screws.
Install the X-series PCI Card
1. Disconnect all peripheral and power cables from the host PC.
2. Remove the host PC system cover.
3. Locate an available PCI slot for the X-series PCI card.
To Next Page
Loading...
