NCR 5942 - Installation Procedures

Chapter 1: Installation 1-7
NCR 7458 Integrated Mount
This feature provides a display arm mount for integrating the
5942display on an NCR 7458 terminal.
There are two versions of this feature.
Kit No. Description
5942-F026 7458 Peripheral Tray Mount (Beige, G11)
5942-F027 7458 Peripheral Tray Mount (Black, CG1)
Installation Procedures
1. Remove the Left and Right Pivot Housings from the Display Arm.
20500a
Right Pivot Housing
Left Pivot Housing
Screws (2), Phillips Hex Washer,
6-32 x 0.25, Black
7458 Integrated Display Arm
Assembly w/Tilt Swivel