Chapter 2: Display Controls
Displaying the On Screen Display (OSD) Menu
The Control Keys are disabled at power up. To enable the keys:
1. Press and hold the Right-Arrow Key for 5 seconds.
2. Press and hold the Left-Arrow Key for 5 seconds.
3. Press and hold the Left-Arrow Key and Right-Arrow Key
simultaneously for 5 seconds.
4. Press the OSD Key. The OSD Menu is displayed in the center of the
screen.
19913
Menu Key
Used to rotate through Menu functions
and to adjust the function settings.
Right-Arrow increases the setting;
Left-Arrow decreases the setting.
Power Switch Key
Power Indicator
Off = Power OFF
Green = Power ON
Yellow = Power Save Mode
Left-Arrow Key
Right-Arrow Key
Used to select Menu functions
Turns Monitor On/OFF
Figure 2-1
The User Control Keys remain active as long as the Monitor is not
powered off. The =OSD Menu is displayed by pressing the Menu Key.
Pressing the Menu Key again toggles the OSD Menu off.
To Next Page
Loading...
