NCR 7607 - Page 142

9-132 Configuring AMT
6.
Select F10 and [Enter] to Save and Exit.
7. After the system reboots the Intel ® Management Engine BIOS Extension Main Menu is
displayed.
8.
Highlight MEBx Login and select [Enter].
9.
Enter the [password] >> [Enter].
Intel (R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME
v11.0.0.1197Copyright (C) 2003-15 Intel Corporation. All Rights Reserved
MAIN MENU
. MEBx Login
> Intel(R) MEGeneral Settings
> Intel(R) Standard Manageability Configuration
. MEBx Exit
[[éê]=Move Highlight
[ENTER]=Select Entry ESC]=Exit
Note: The first time this program is run you must use the default password, admin
(lower case).
[admin] >> [Enter]
At the prompt, enter the new password (write it down to remember). The password
must contain upper, lower, symbol, & numeric characters.
Example: Ncr@2016
You must enter the password a second time for verification.