9-134 Configuring AMT
11.
Highlight Activate Network Access and select [Enter]
Intel (R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME
v11.0.0.1197Copyright (C) 2003-15 Intel Corporation. All Rights Reserved
INTEL (R) STANDARD MANAGEABILITY CONFIGURTION
. Manageability Feature Selection
> SOL/IDER
> User Consent
. Password Policy
> Network Setup
. Activate Network Access
. Unconfigure Network Access
> Remote Setup and Configuration
> Power Control
<Enabled>
<Anytime>
<Full Unprovision>
[[éê]=Move Highlight
[ENTER]=Select Entry ESC]=Exit
12.
Select Y for Yes to activate the network interface.
13.
Select [ESC] >> [ESC] >> Y to exit the Intel ® Management BIOS Extension and reboot
the system.
14. The terminal should now be accessible using its IP address.
Note: The BIOS Hotkey Pressed setting is reset to Disabled automatically when you exit
AMT.
To Next Page
Loading...
