ii
Grounding Instructions
In the event of a malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This product is
equipped with an electric cord having an equipment-grounding conductor and a
grounding plug. The plug must be plugged into a matching outlet that is properly
installed and grounded in accordance with all local codes and ordinances. Do not
modify the plug provided – if it will not fit the outlet, have the proper outlet installed by
a qualified electrician. Improper connection of the equipment-grounding conductor can
result in a risk of electric shock.
The conductor with insulation having an outer surface that is green with or without
yellow stripes is the equipment-grounding conductor.
If repair or replacement of the electric cord or plug is necessary, do not connect the
equipment-grounding conductor to a live terminal. Check with a qualified electrician or
service personnel if the grounding instructions are not completely understood, or if you
are in doubt as to whether the product is properly grounded.
Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole
receptacles that accept the product’s plug. Repair or replace damaged or worn cords
immediately.
References
• NCR POS XR8/XR8c (7607) User Guide (B005-0000-2436)
• NCR POS XR8/XR8c (7607) Site Preparation Guide (B005-0000-2437)
• NCRPOS XR8/XR8c (7607) Hardware Service Manual (B005-0000-2438)
• NCRPOS XR8/XR8c (7607) Parts Identification Manual (B005-0000-2439)
• NCRPOS XR8/XR8c (7607) Power Matrix (B005-0000-2440)
• NCR POS XR8/XR8c (7607) User Documentation (HTML) (B005-0000-2452)
To Next Page
Loading...
Need help?
General
