NCR 7837 - Wand Emulation Connection Setup

2–1
3
7837 User’s Guide
Wand Emulation Connection
In Wand Emulation mode, the scanner decodes the bar code then sends data
in the same format as a wand scanner. The Code 39 Format converts all
symbologies to Code 39. The Same Code Format transmits UPC, EAN, Code
128 and Interleaved 2 of 5 without any changes, but converts all other
symbologies to Code 39. These codes set the transmission rate to 25 inches
per second and the output polarity to black, high.
Default = Code 39 Format.
* Code 39 Format
Same Code Format