NCR 7837 - Interleaved 2 of 5 Barcode Settings

7–11
7837 User’s Guide
  
Interleaved 2 of 5
Check Digit
   
* No Check Digit
  
<Default
A
ll
In
te
r
lea
v
e
d 2 o
f
5 S
ett
ings>
Interleaved 2 of 5
* On
Off
No Check Digit indicates that the scanner reads and transmits bar code data
with or without a check digit.
When Check Digit is set to Validate, but Don’t Transmit, the unit will only read
Interleaved 2 of 5 bar codes printed
with a check digit, but will not transmit the
check digit with the scanned data.
When Check Digit is set to Validate and Transmit, the scanner will only read
Interleaved 2 of 5 bar codes printed with a check digit, and will transmit this
digit at the end of the scanned data.
Default = No Check Digit.