7837 User’s Guide
3–2
Beeper Tone
Default = Normal.
* Normal Beep
Short Bip
Scan Voting
This sets the number of times the same bar code has to be read before it is
transmitted to the terminal. Normal uses the default values listed for the
symbologies in the Default Charts in Section 10. High doubles the votes used
below the threshold.
Default = Voting Normal.
* Voting Normal
Voting High
R educe Quiet Zone
Reducing the quiet zone requirements below AIM guidelines makes it possible
to read off–spec bar codes. This feature is effective with all symbologies.
Default = Don’t Reduce Quite Zone.
* Don’t Reduce Quiet Zone
Reduce Quiet Zone
To Next Page
Loading...
