NCR 7837 - Telepen Barcode Settings

7–21
7837 User’s Guide
  
Telepen
<Default All Telepen Settings>
Telepen
* On
Off
Telepen Output
Using AIM Telepen Output, the scanner reads symbols with start/stop pattern 1
and decodes them as standard full ASCII (start/stop pattern 1). When Original
Telepen Output is selected, the scanner reads symbols with start/stop pattern 1
and decodes them as compressed numeric with optional full ASCII (start/stop
pattern 2).
Default = AIM Telepen Output.
Original Telepen Output
* AIM Telepen Output