NCR 7837 - Page 61

7–
7
7837 User’s Guide
  
Code 39, continued
No Check Character indicates that the scanner reads and transmits bar code
data with or without a check character.
When Check Character is set to Validate, but Don’t Transmit, the unit will only
read Code 39 bar codes printed
with a check character, but will not transmit
the check character with the scanned data.
When Check Character is set to Validate and Transmit, the scanner will only
read Code 39 bar codes printed with a check character, and will transmit this
character at the end of the scanned data.
Default = No Check Character.
C
heck
C
h
ara
c
t
e
r
   * No Check Character
  