7-48 Chapter 7: Programming
(Hex 0 through Hex 7 for the first character and Hex 0 through Hex F
for the second). The default for this parameter is 03.
Program Example
Following is an example of a completed RS-232 Terminator Byte
programming worksheet. This example shows the Terminator Byte
enabled and ASCII code CR (0D Hex) transmitted as the Terminator
Byte.
Your Program
A
Terminator Byte
1
B
Code
ASCII
0 D
RS-232
Terminator Byte
2 3
R0075
To Next Page
Loading...
