NCR 7870 - Page 204

Appendix A: Programming Worksheets A-5
Programming Mode Default
RS-232 Prefix Byte
Prefix Byte
ASCII Code
Disable
02
RS-232 Terminator Byte
Terminator Byte
ASCII Code
Disable
03
RS-232 Communications Options
Message Delay
Scanner or Scanner/Scale Format
Normal or Eavesdrop Mode
Beep at Scale Weight Transmission
10 ms Delay
Determined by Model
Normal Mode
No Beep
Scale Parameters
Model Number
9.995 kg/13.995 kg
IBM Address
No Default
No Default
Address 6E set by
selecting IBM 468x on
Communications Protocol
Worksheet
Miscellaneous Parameters
5-Second Weight Display Timer
IBM Tone Control (Good Read Tone)
OCIA Price Display
IBM Rexmit Control
OCIA Blank Display in Price Mode
Enable/Disable Voice Messages
IBM Tag Data Format
Enabled
Enabled
Enabled
Permanently Enabled
Disabled
No Default
Hex
Dual Cable Interface
Scale Type
Avery