NCR SelfServ 22e - Unpackaged ATM

NCR SelfServ 22e ATM Site Preparation
B006-6902-D000 13
Unpackaged ATM
The following table gives the minimum dimensions for doorways, corridors with right
angle corners and the space required to rotate on its axis an unpackaged front access
ATM.
Note 1: The dimensions assume the ATM is being moved using equipment that does not
extend beyond the ATM or packaging.
Note 2: A surrounding clearance of 6 mm (0.24 in.) has been allowed in the figures.
With Barcode Reader
Without Barcode Reader
CEN Grade L or CEN
Grade 1
UL 291 24 Hours
Level 1
UL 291 Business
Hours
A Doorway or straight corridor 462 mm
(18.19 in.)
462 mm
(18.19 in.)
462 mm
(18.19 in.)
B Corridor with corner 619 mm
(24.37 in.)
612 mm
(24.09 in.)
609 mm
(23.98 in.)
C Rotation about centre 943 mm
(37.13 in.)
926 mm
(36.46 in.)
917 mm
(36.10in.)
CEN Grade L or CEN
Grade 1
UL 291 24 Hours
Level 1
UL 291 Business
Hours
A Doorway or straight corridor 462 mm
(18.19 in.)
462 mm
(18.19 in.)
462 mm
(18.19 in.)
B Corridor with corner 609 mm
(23.98 in.)
602 mm
(23.70 in.)
599 mm
(23.58 in.)
C Rotation about centre 916 mm
(36.06 in.)
899 mm
(35.39 in.)
890 mm
(35.04 in.)
A
B
B
C