NCR SelfServ 22e - Rear Access

NCR SelfServ 22e ATM Site Preparation
14 B006-6902-D000
Rear Access
Packaged ATM
The following table gives the minimum dimensions for doorways, corridors with right
angle corners and the space required to rotate on its axis a packaged ATM.
Note 1: The dimensions assume the ATM is being moved using equipment that does not
extend beyond the ATM or packaging.
Note 2: A surrounding clearance of 6 mm (0.24 in.) has been allowed in the figures.
Unpackaged ATM
The following table gives the minimum dimensions for doorways, corridors with right
angle corners and the space required to rotate on its axis an unpackaged rear access
ATM.
Note 1: The dimensions assume the ATM is being moved using equipment that does not
extend beyond the ATM or packaging.
Pallet, carton and lid Pallet and carton Pallet without carton
A Doorway or straight
corridor
818 mm
(32.20 in.)
813 mm
(32.01 in.)
813 mm
(32.01 in.)
B Corridor with corner 1091 mm
(42.95 in.)
1080 mm
(42.52 in.)
1075 mm
(42.32 in.)
C Rotation about centre 1662 mm
(65.43 in.)
1642 mm
(64.65 in.)
1629 mm
(64.13 in.)
A
B
B
C