NCR SelfServ 22e - Minimum Clearances; Front Access CEN L;CEN 1

NCR SelfServ 22e ATM Site Preparation
34 B006-6902-D000
Minimum Clearances
The following illustrations show the minimum areas required for installing and servicing
the ATM.
Note: Baseline for dimensions is either the front or the rear of the security enclosure with
the security enclosure door open as indicated by the dotted line.
Front Access CEN L/CEN 1
The illustration below shows the minimum clearance dimensions for an ATM fitted with
a CEN Grade L security enclosure.
Front of
Security
Enclosure
900 mm
(35.43 in.)
712 mm
(28.03 in.)
208 mm
(8.19 in.)
999 mm
(39.33 in.)
450 mm
(17.72 in.)
246 mm
(9.68 in.)
1612 mm
(63.46 in.)
38 mm
(1.50 in.)
55 mm
(2.16 in.)
38 mm
(1.50 in.)
38 mm
(1.50 in.)
526 mm
(20.71 in.)
303 mm
(11.93 in.)
265 mm
(10.43 in.)