NEC AK-308 - Automatic Repeat Dialing

Trunk Outgoing Call
12


 Automatic Repeat Dialing
Trying to get in touch with a customer and their phone is always busy or unanswered? Don’t keep redialing it
manually - have Automatic Repeat Dial do it for you. Automatic Repeat Dial will retry your call until the
called party answers or the feature is cancelled. The number of times the system retries a call is
programmable. Moreover, while Automatic Repeat Dialing is set (waiting, busy or no-answer), Hurry-Up
operation can be taken place for immediate redial.
While Automatic Repeat Dialing is set (waiting condition), 2-Splash tone (Mute-tone) is emitted from built-
in speaker in 5 sec. cycle.
1. Place outside call.
- Listen for busy tone or ring-no-answer.
2. Press key.
3. Dial .
4. Replace handset or press key.
- The system periodically redials the call.
1. Lifting the handset cancels Automatic Repeat Dialing.
1. Press key.
2. Dial .
Note: Repeat Dialing and Hurry-Up Operation can be stored under One-touch key.
To set Automatic Repeat
Dialing:
To cancel Automatic Repeat
Dialing:
To use Hurry-Up operation:
1
SPK
OPAC
2
OPAC