NEC AK-308 - Alarm Clock; Stopwatch; Busy Lamp Field

Alphanumeric Display TEL Features
47


 Alarm Clock
The Alarm Clock feature lets you set two alarms on your display key telephones as a reminder for
appointments, meeting, etc. The alarms sound every day at the set time unless they are canceled.
1. Press .
2. Press key.
3. Press , dial .
4. Dial to set first alarm or dial to set second
alarm.
5. Dial time in terms of 24 hour clock. For example, dial
1545 for 3:45 PM.
6. Dial .
7. Press .
1. Press .
2. Press key.
3. Press , dial .
4. Dial to check first alarm or dial to check second
alarm.
5. Press .
1. Press .
1. Press .
2. Press key.
3. Press , dial .
4. Dial to cancel first alarm or dial to cancel second
alarm.
5. Dial .
6. Press .
Note: This feature can be stored under the One-touch key.


 Stopwatch
The clock on a Display phone can be used as a Stopwatch to time events. For example, the Stopwatch can be
used to time the duration of a phone call.
1. Press , dial to start timing.
2. Press , dial again to stop timing.
3. Press to return to the date and time.
Note: This feature can be stored under the One-touch key.


 Busy Lamp Field
The Busy Lamp Field (BLF) feature provides a light (LED) indication under a One-touch key used as Direct
Station Selection (DSS) key to indicate the status of the associated extension. Busy Lamp Field (BLF)
indication is shown for any One-Touch keys you have programmed. This shows you if your co-worker is on
a call, in Do Not Disturb, or idle.
To set alarm:
To check an alarm setting:
To stop the alarm tone:
To cancel an alarm:
To activate Stopwatch:
SPK
OPAC
5 0
1 2
∗
SPK
SPK
OPAC
5 0
1
2
SPK
CLEAR
SPK
OPAC
5 0
2
∗
SPK
1
OPAC
5 1
OPAC
5 1
CLEAR
ICM
ICM
ICM