NEC AK-308 - Hold and Transfer to FAX Machine; Outgoing Call from FAX Machine

Other Features
62
Hold and Transfer to FAX Machine
In case an extension user answers to FAX call due to some reason (Miss-operation by the outside caller,
etc….), this call can be transferred to the connected FAX Machine by manual operation.
1. Answer an incoming call. (CNG signal may be heard.)
2. Press .
- Confirmation tone(Short beep tone) shall be heard if
transmission is successful.
- If error tone is heard, transmission is failed due to
some reason(Fax machine is in busy status, etc…..).
3. Hang up.
1. Answer an incoming call. (CNG signal may be heard.)
2. Flash Hookswitch.
3. Dial the Extension Number of Fax Machine.
4. Hang up.
Outgoing Call from FAX Machine
The FAX Message can be sent from the connected FAX Machine to outside FAX Machine without dialing a
trunk access code.
1. Go off-hook at FAX Machine.
2. Dial outside FAX Number.
3. Press START key after the outside FAX Machine
answers.
Note: Ask your supplier for the details.
To Hold and Transfer to Fax machine:
TRFR
To Outgoing call from Fax machine: