Installation
Using the Headband Style Headset with your Cordless Telephone
DS1000/2000 Cordless Telephone User Guide Chapter 1: Installation ◆ 17
1
■ Remove the ear cushion.
Figure 19: Removing the Ear Cushion
■ Snap on the earloop ring. (Make sure the earloop ring lies flat against the microphone boom as shown.)
Figure 20: Snapping on the Earloop Ring
■ Insert the earloop into the earloop ring. (Installation for the right ear is shown. For the left ear, insert the
earloop from underneath the earloop ring.)
Figure 21: Inserting the Earloop into the Earloop Ring
80683 - 20
80683 - 21
80683 -
22
To Next Page
Loading...
