NEC DSX User Manual

11
Installing And Using a Headset
Features to make you
More Productive
To install an optional corded headset:
1. Plug the headset cord into the headset jack on the bot-
tom of the telephone.
2. The headset cord routes through the upper channel on
the right side of the telephone base.
To set up a headset Feature Key:
1. Push Menu + Dial 51 + Press Feature Key.
2. Push Select then >> repeatedly to scroll to Headset .
3. Push Select to choose the Headset assignment.
3. Push Back + Exit to exit.
To turn the headset mode on and off:
1. Press your Headset Feature Key.
– The headset key is on while in the headset mode; off while in the normal handset mode.
– You can optionally push Menu and dial 91.
To use your headset:
1. While in the headset mode, you can do the following:
– Press a line key to place or answer an outside call.
– Press INTERCOM to dial a co-worker on the Intercom.
– While on a call, press SPEAKER to hang up.
2. Keeping the above three things in mind, process calls normally using the convenience of a headset.
About the DSX Wireless Headset Adapter (WHA)
The DSX Wireless Headset Adapter allows you to connect a Plantronics Wireless Headset System
directly to the headset jack on specific models of DSX telephones. The DSX Wireless Headset Adapter
tightly integrates your headset system with the DSX to provide enhanced wireless mobility and call
answering. The Plantronics lifter is not required. To learn more, download the DSX Wireless Headset
Adapter User guide from www.necdsx.com.
1093057_rev1-09.qxd 7/31/09 2:42 PM Page 11

NEC DSX Specifications