NEC DT310 - To Transfer a Call

27
4.FEATURE OPERATION
To Originate a Call Using Speed
Calling (One-touch Speed Calling
keys)
Press the desired Speed Calling key, or press
Speaker and One-Touch Speed Calling key.
To program
(Available only on DT Series with Speed Calling key.)
Press Feature button.
Press desired One-Touch Speed Calling key.
Enter desired telephone number or feature access
code on the keypad.
Display indicates the digits dialed.
Press Feature again to save the number.
To verify
Press Feature button.
Press desired One-Touch Speed Calling key.
Display indicates digits programmed.
4:26 PM TUE 13 APR 2004
SET