35
To Transfer a Call
After conversing, ask party to hold.
Press Transfer. Receive interrupted dial tone.
Dial destination station’s extension, hang up or wait
for answer.
To Place a Call on Hold
Press the HOLD key. Held line wink flashes.
Note:
If held line appears on other stations, the
associated LED flashes red slowly.
To Retrieve:
Lift handset or press Speaker key.
Press held line. User handset to converse.
Note:
Any station with this line appearance can
retrieve the call.
If Unanswered:
After preprogrammed time, Automatic Recall is
initiated.
Visual and audible signal (rapid flash and ring
burst) is sent to station that placed call on hold.
Note:
Hold shows as a flashing green LED on your
phone. The same line on other phones shows
as flashing red LED. Recall shows as a
flashing green LED on your phone and
flashing red LED on other phones with the
same line.
To Place a Call on Exclusive Hold
To Initiate:
Press the HOLD key twice. Line appearance
indicates interrupted wink.
Note:
If held line appears on other stations, LED
remains steadily lit red.
Transferred station
or trunk number
4:26 PM TUE 12 FEB 2008
XFR 2001
4:26 PM TUE 12 FEB 2008
HLD 2001
Held station
number
4:26 PM TUE 12 FEB 2008
EHD 2001
Held station
number
To Next Page
Loading...
