NEC DT310 - To Originate a Call Using Speed Calling (Station;Group); To Originate a Call Using Speed Calling (System)

30
To Originate a Call Using Speed
Calling (Station/Group)
Press the Redial button.
Press the desired speed calling number.
To Originate a Call Using Speed
Calling (System)
To program Speed Calling – System key (on
one-touch speed calling key)
Press Feature key.
Press desired One-Touch Speed Calling key. The
LCD displays previously stored digits.
Dial the “Speed Calling – System” access code and
the abbreviated call code.
Press Feature again.
To operate from the Speed Calling – System key
Press the “Speed Calling – System” key.
If the DT Series does not have the “Speed Calling –
System” key, dial the “Speed Calling – System”
access code, then the abbreviated call code.
To operate from the Directory key
Press the Directory key.
Dial the abbreviated call code (maximum of 4
digits).
XXXXXX
LNR[ ]/SPD[_ _] –X
*
4:26 PM TUE 13 APR 2004
SET
4:26 PM TUE 13 APR 2004
XXXX
4:26 PM TUE 13 APR 2004
XXXX