NEC DT800 - Keypad and Display Features; Help Key; LCD Screen Operation; LCD Line Keys

This key is used to turn over the page of 8LD display.
Status of the Line key such as Call termination, Call Hold or
Busy, and setting on the Feature key are shown as Icons.
32 (8 keys x 4 pages) additional programmable keys are
provided.
(6) Help
Explanations of the Soft Keys can be called up on the LCD by
pressing this key.
(7) LCD Screen
Any feature shown
on the LCD is available. The appropriate
feature is
displayed on the screen according to the call handling
process.
(8) LCD Line Keys
The appropriate line feature on the LCD is
called up by pressing
these
keys.
(9) Scroll Key
* Maximum 8 characters can be displayed.
** The users can change the name displayed on the LCD. For
the operating procedure, refer to
To Register Name On
OneTouch Speed Dial key
.
Icons
User’s Status Icon
Flashing
Pattern
Idle
x Call Hold (Individual Hold on Call
Park Group) x Exclusive Call Hol
Blink
Note
x Recall (Individual Hold/Exclusive
Call Hold/Call Transfer/
x Individual Hold on Call Park Group)
Blink
Note
x During Conversation (Individual
Use)
x Call Transfer
x Conference