EasyManua.ls Logo

NEC DT800 - Call Management Keys; Transfer Key; Hold Key; Terminal Setup Methods

NEC DT800
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
(18) Transfer
Allows the station user to transfer established calls to another
station, without attendant assistance.
(19) Hold
Press this key to place a call on hold. Pressing twice lock held
call to this station.
.
This describes operating procedures for terminal settings
by the UP/Down Key and Feature Keys.
Terminal Setup with the Up/Down Key
To Adjust Handset Receiver Volume
Press the Up/Down key in the off-hook status or during the
call.
To Adjust Speaker Volume
Press the Up/Down key during speakerphone operation or
during the call.
To Adjust Ringer Tone Press the
Up/Down key during ringing.
To Adjust LCD Contrast
Press the Up/Down key in the on-hook status.
Note: When the terminal is connected with 16LD ADM, 16 degrees of
LCD contrast are available (8 degrees in terminal side and 2 degrees
in ADM itself). (In Expansion mode only, Link motion)

Related product manuals