… After preprogrammed time, Automatic Recall is initiated.
… Visual and audible signal (rapid flash and ring burst) is sent
to station which placed call on Exclusive Hold. Recall shows as
a flashing green LED on your phone, and solid red on other
phones with same line.
Note: Exclusive Hold excludes any other phone from picking up
your held call. Exclusive Hold shows as a flashing green LED
on your phone. The same line on other phones appears as a
solid red LED.
To Transfer a Call
… After conversing, ask party to hold.
Press Transfer. Receive interrupted dial tone.
TRANSFER
4:26 PM TUE 13 APR 2020
[ Conf. ][ Headset ][ Release ][>>>]
… Dial destination station’s extension, hang up or wait for
answer.
To Conference a call
TRANSFER
4:26 PM TUE 13 APR 2020
[ Conf. ][ Headset ][ Release ][>>>]
With call in progress, ask party to hold.
Press Transfer key, receive interrupted dial tone.
Dial desired number.
After call is answered, press Conf key.
CONF
4:26 PM TUE 13 APR 2020
[ Conf. ][ Headset ][ Release ][>>>]
Three-way conference is established.
If one party hangs up, other two remain connected.
Last
Call Pickup (Group)
When Station Within Pickup Group Rings
Lift handset.
Press Call Pickup key or dial Call Pickup access
code (may be stored on-one-touch speed calling
key).
PICK UP
4:26 PM TUE 13 APR 2020
[ Release ][ Headset ][ Pickup/G ][>>>]
Connection to calling party is established.
To Next Page
Loading...
