NEC Dterm Series i Quick Reference Guide

The Dterm Series I
16-Button Phone Set
Speaker
Output
Exit
Feature
Conference
Redial
Answer
Transfer
Speaker
Control &
Indicator
Hold
Built-in
Microphone
LCD
24 Characters x 3 lines
Adjustable Angle
Indicator Lamp
• Incoming Call
• Message Waiting
(Voice Mail)
10/100
Base T Switch
(Future Enhancement)
4 Administrative
Soft Keys
8 Programmable
Keys Flexible
Line/Feature Keys
Microphone &
Indicator Lamp
Volume Control
• Ring
• Receive
• LCD Contract
Help
Recall
Conf (Conference): Press this key to
establish a three-way conversation. The LED
on the key lights when the key is active.
Answer: When LED on this key is lit, press key to
answer call.
Hold: Press key to place a call on hold.
Feature: Used to activate terminal setup functions
and to program One-Touch Speed Dial/Feature
Keys.
Recall: Press key to terminate established call
and reseize internal dial tone.
Redial: Press key to activate Last Number Call
redial and Speed Calling.
Transfer: Allows the station user to transfer
established calls to another station, without
attendant assistance.
Speaker: Controls the built-in speaker which can be
used for Hands Free dialing/monitoring LED on key
lights when key is active.
Microphone: Press key to turn on/off the
microphone.
Up/Down: Used to adjust LCD contrast,
speaker/receiver volume, and ringer volume.
NEC Dterm Series I 16-Button Telephone QUICK REFERENCE GUIDE
(These instructions apply to all NEC Dterm Series I users)
Amarillo College Faculty and Staff
FUNCTION KEYS

NEC Dterm Series i Specifications

General

Type	Digital Telephone
Speakerphone	Yes
Headset Jack	Yes
Dimensions	Varies by model
Weight	Varies by model
Display	LCD
Programmable Buttons	Yes
Power Supply	Powered by the phone system
Memory	Varies by model