NEC Dterm Series i Quick Reference Guide

4
Connection to calling party is established.
LAST NUMBER REDIAL
To recall the last number dialed:
Press Redial. Last number dialed is displayed.
Press Redial key until desired number is displayed. Up to 5 previously dialed numbers.
Press *. The number on the display is automatically redialed.
When party has answered, lift handset or speak hands free.
TO TURN THE MIC ON & OFF
Press Feature or FNC button to turn it on, the led on the button will light.
Press the 1 key, this will toggle the mic on & off.
CALL FORWARDING-ALL CALLS
To Set:
Press Speaker. Receive dial tone.
Press FWD or dial Call Forwarding access code. Receive special dial tone.
Dial destination station or external telephone number. Receive service set tone.
FWD LED lights (at your station or at the Dterm of the sub line station you are setting).
To Set Using the Soft Key
Press Speaker. Receive dial tone.
Press FDA Soft Key. Receive special tone.
Dial destination; wait for service set tone.
"FORWARD SET” is displayed; call forwarding for all calls is set.
NOTE: With Soft Key operation, FDA flashes on the display.
To verify (with 16 or 32-button D-term):
Press FWD.
Display indicates the station number calls are forwarded to.
NOTE: If recipient station is a 16- or 32-button D-term, LCD displays:
To cancel:
Press Speaker. Receive dial tone. .
Press FWD or dial Call Forwarding cancel code. Receive service
set tone. LED goes out at your station (or the D-term of the
sub line station).

NEC Dterm Series i Specifications

General

Type	Digital Telephone
Speakerphone	Yes
Headset Jack	Yes
Dimensions	Varies by model
Weight	Varies by model
Display	LCD
Programmable Buttons	Yes
Power Supply	Powered by the phone system
Memory	Varies by model