English
Preparation
IMPORTANT: Do not apply pressure to the screen display area which may compromise
the integrity of the display� The manufacturer’s warranty does not cover user abuse or
improper installations�
Attaching the Base
E553/E463/E423 E323
1� Place the display face down on a soft and at surface to prevent
scratching and damage�
2� Carefully align the base to the stand and fasten the screws with a cross-
head screwdriver�
CAUTION: The base of the stand is very heavy� Install with care to avoid injury such as
dropping the base onto one's foot�
Using Cable Clamper
Tie the cables together using the cable clamper�
To Next Page
Loading...
