NEC ELECTRA ELITE IPK II - CALL PARK - SYSTEM; To Park a call in a system orbit

3 - 2 IPK II IAD(8)-U( ) Programming
___________________________________________________________________________________
___________________________________________________________________________________
Document Revision 1 H.323 Trunk
5 Examine the IAD board and verify the DIP switch settings. Repeat steps 1-3.
 The IAD(8)-U10 ETU consumes trunk ports according to the configured type of
card (based upon DIP switch settings). The IPK II recognizes all DTI( ) cards as
DTI(24).
The IAD only has resources for 8 trunks. The balance of the trunks must be
assigned in Memory Block 14-05-01 to Trunk Group 0. The unsupported trunks
count against the total number of trunks supported by the IPK II.