NEC ELECTRA ELITE IPK II - CALL FORWARDING; All Calls (CF;A)

H.323 Trunk Document Revision 1
Hardware, Installation and Maintenance Manual A - 9
___________________________________________________________________________________
___________________________________________________________________________________
SECTION 5STATION SETTINGS
The Station Settings table only applies to the IAD(8)-U( ) configured for COI/COID/
DTI-ANI mode.
Caller ID
This field provides the Caller Name for the called party in outgoing calls. For example,
if Trunk 1 makes a successful outgoing call; the called party receives the caller name
stored in this field.
Dialed Number
This field is used for both incoming and outgoing calls.
Figure A-5 Port Parameters