EasyManua.ls Logo

NEC ELECTRA ELITE IPK II - MESSAGE WAITING; To leave a Message Waiting; To answer a Message Waiting

NEC ELECTRA ELITE IPK II
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
H.323 Trunk Document Revision 1
Hardware, Installation and Maintenance Manual 4 - 3
___________________________________________________________________________________
___________________________________________________________________________________
When the user dials any number beginning with 214 (e.g., 2145551234), the call
is routed to a IAD(8)-U() ETU with IP Address 10.1.0.100.
7. When all parameters have been configured, select Submit.
8. Select the System tab, then select the Reset the Card option. The ETU goes
through a reboot cycle and may take a few minutes.
9. Disconnect the crossover cable and connect the IAD (8)-U( ) ETU to the LAN
port.
The ETU is now ready for operation.
SECTION 4SHUTDOWN PROCEDURE
The IAD(8)-U( ) ETU is a hot swappable ETU and can be removed from the KSU
without powering down the IAD(8)-U( ) ETU or the KSU system.
If the KSU requires a system reset, the IAD(8)-U( ) ETU will come back online.

Table of Contents

Other manuals for NEC ELECTRA ELITE IPK II

Related product manuals