H.323 Trunk Document Revision 2
Hardware, Installation and Maintenance Manual D - 5
___________________________________________________________________________________
___________________________________________________________________________________
7. Congratulations, you have successfully loaded your application package. Wait
until the following screen is displayed.
8. You can now remove the IAD(8)-U( ) ETU and configure the Dip Switch Setting
to the applicable Mode of operation (if so required by the package you loaded).
9. Each application package behaves differently when in functional mode. So,
consult the documentation that is provided with the package prior to using it.
Figure D-4 ETU Successfully Loaded Message
To Next Page
Loading...
