USERS_GUIDE_1080XD_hw
1-14
1.4.1.2.2 Confirmation of DC power off
Please confirm the SP console shows the following screen.
>> SP LOG MESSAGE START (07: 6K) <<
05/29/2003 19: 21: 54 0------- SP detected the completion of OS shutdown.
>> SP LOG MESSAGE END <<
>> SP LOG MESSAGE START (07: 6M) <<
05/29/2003 19: 21: 54 0------- System shutdown started. (SPFW: R05.21)
>> SP LOG MESSAGE END <<
[iSP0m: INFO.0701] partition 0 : power off sequence started.
[iSP0m: INFO.0725] partition 0 : turning off CELL(s)...
[iSP0m: INFO.0726] partition 0 : turning off PCIX(s)...
[iSP0m: INFO.0727] partition 0 : turning off XBC(s)...
[iSP0m: INFO.0718]
**************************************************
* Waiting 2 minutes for cooling components. *
* DC power is still active. *
**************************************************
* DO NOT turn off AC power. *
**************************************************
[iSP0m: INFO.0728] partition 0 : turning off PBAY(s)...
>> SP LOG MESSAGE START (07: 6M) <<
05/29/2003 19: 24: 05 0------- System shutdown completed. (SPFW: R05.21)
>> SP LOG MESSAGE END <<
[iSP0m: INFO.0703] partition 0 : power off sequence completed normally.
[iSP0m: INFO.0771]
**************************************************
* All DC power has been turned off. *
* You can turn off AC power. *
**************************************************
To Next Page
Loading...
