NEC Express5800 1080Xd - DVD-ROM Drive

USERS_GUIDE_1080XD_hw
1-17
1.4.4 DVD-ROM Drive
1.4.4.1 Insert/eject to/from DVD-ROM drive
(1) How to insert DVD-ROM/CD-ROM
1) Touch on the ejector button to open the tray.
2) Place the DVD-ROM/CD-ROM on the tray with the label side up.
3) Touch the ejector button to close the tray.
(2) How to eject DVD-ROM/CD-ROM
1) Confirm the access display LED (orange) on the DVD-ROM drive is on.
2) Touch on the ejector button.
3) Touch on the ejector button to open the tray.
4) Eject DVD-ROM/CD-ROM from the tray.
5) Touch the ejector button to close the tray.
(3) How to eject DVD-ROM/CD-ROM when the tray does not open after touching the
ejector button
1) Confirm the DC/ALM LED on the PCI box is off.
2) Insert a long and thin metal bar such as a clip into the emergency hole.
3) After the tray opens slightly, pull out the tray.
4) Eject DVD-ROM/CD-ROM from the tray.
Caution
Be careful not to pinch your hands in the tray. It may cause an
injury.
Caution
Be careful not to hurt your figures when inserting a thin metal
bar into the emergency hole.