NEC Express5800 1080Xd - OS (BIOS) Console

USERS_GUIDE_1080XD_hw
1-26
1.4.7.2 OS (BIOS) console
If you select the OS (BIOS) console on the iSO first menu, the I/O into the serial controller
visible on OS (BIOS) is re-directed. To go back to the first menu from that status, enter “^B”
(press “B” while holding CTRL).
The display images or the operations in the re-directed status depend on the BIOS and OS
operating on that particular partition and have no relation to the iSP. The OS (BIOS) console
re-direction is available only with the master iSP.
(Screen Image)
Description code
iSP MAIN MENU
0) OS(BIOS) serial console of partition#0 (INITIALIZING )
1) OS(BIOS) serial console of partition#1 (RUNNING )
2) OS(BIOS) serial console of partition#2 (STOPPED )
3) OS(BIOS) serial console of partition#3 (FAULT )
4) OS(BIOS) serial console of partition#4 (POWER OFF )
5) OS(BIOS) serial console of partition#5 (RUNNING )
6) OS(BIOS) serial console of partition#6 (NOT CONFIGURED)
7) OS(BIOS) serial console of partition#7 (NOT CONFIGURED)
V) Virtual System Operator Panel
S) iSP commands
E) Exit
DISCONNECTALL) disconnect all console connections
iSP yz> 0<ENTER>
(a)
***** redirection of serial console 0 *****
***** enter CTRL+B to quit *****
(b)
:
:
:
:
:
(c)
<CTRL>+<B>
(d)
***** returned from serial console 0 redirection ***** (e)