USERS_GUIDE_1080XD_hw
1-4
(1) Switch pannel
(1)-1 AC switch
Main chasis AC power switch
(2) Main chasis
(2)-1 CELLV board
The CELLV board consists of a maximum of four Itanium2, one CPU Node
Controller (CNC), and a maximum of two Main Memory Controller
(MMC).Up to one CELLV board and two CELLV boards can be installed in
the 4Way main cabinet and 8Way main cabinet, respectively.
(2)-2 iSP-C card
iSP-C (service processor) card has an I/O interface (except for 1.6G interface)
in the basic processing device of the Express server as a standard. This iSP-C
card is installed in the main chasis of the main cabinet.
The following standard I/O interfaces are provided by an iSP-C card. The
interfaces from 1 to 3 are dedicated interfaces used to implement the system
control function and the RAS function.
1. 10/100BASE-TX Ethernet interface x1 for SP console
2. ICMB port x1 for IO cabinet control
3. Serial (RS-232C) interface x1 for SP console
(2)-3 Core module
Up to 12 PCI cards can be installed in the core module. Additionally, a BaseIO
card, which is used to support standard optional I/O interface, can be installed
in the core module.
(2)-4 DVD-ROM Drive
DVD-ROM and CD-ROM media can be used as DVD-ROM Device.
(2)-5 Floppy Disk Drive
Floppy Disk Medium can be used as Floppy Disk Drive.
(2)-6 Magnetic Disk Drive
Up to four 36.3 GB-73.2 GB Magnetic Disk Drives can be installed.
(2)-7 Power module
To Next Page
Loading...
