NEC Express5800 1080Xd - Page 41

USERS_GUIDE_1080XD_hw
1-41
1.4.7.5.7 SR (Save system CMOS/NvRAM)
Function:
Read out the CMOS/NvRAM content of the system and save them on a FTP server, or
alternately restore from the files on a FTP server.
The object partition must be in the EFI shell prompt after BIOS is booted. Otherwise, a
proper operation is not assured, besides it may corrupt the CMOS/NvRAM content.
(Screen Image)
Description
code
iSPyz: MNT> sr<ENTER>
CAUTION: This command MUST be used when target system is in EFI
shell prompting. Otherwise CMOS/NvRAM may be DESTROYED or this com
mand do NOT work properly.
Enter partition number? (0-7/CR=exit) : 1<ENTER>
(a)
Save of Restore? (s/r/CR=back) : s<ENTER>
getting CMOS/NvRAM from partition 1...
got.
(b)
ERROR: cannot get CMOS/NvRAM from partition 1. Check the state of p
artition 1.
Enter partition number? (0-7/CR=exit) :
(c)
IP of FTP server [default=10.0.0.2] (CR=skip) : 10.0.0.3<ENTER>
account [default=necuser] : necuser<ENTER>
password [default=********] : xxxxxxxx<ENTER>
file path : cmossave/cmos1.bin<ENTER>
(d)
Save OK? (y/[n]) : y<ENTER>
(e)
Connecting...
uploading...
(f)
uploaded.
Enter partition number? (0-7/CR=exit) : 2<ENTER>
(h)
Save or Restore? (s/r/CR=back) : r<ENTER>
IP of FTP server [default=10.0.0.2] (CR=skip) : 10.0.0.3<ENTER>
account [default=necuser] : necuser<ENTER>
password [default=********] : xxxxxxxx<ENTER>
file path : cmossave/cmos2.bin<ENTER>
Restore OK? (y/[n]) : y<ENTER>
(i)
Connecting...
connected.
Downloaded.
(j)
ERROR: cmossave/cmos2.bin does not exist.
Enter partition number? (0-7/CR=exit) :
(k)
checking downloaded file.
passed.
restoring CMOS/NvRAM...
completed.
You need to reset the target partition.
(l)
Refer to the following descriptions for
notes about operation.
NML MNT
X