NEC Express5800 1080Xd - Page 64

USERS_GUIDE_1080XD_hw
1-64
The following table includes the functions of each menu.
Item Parameter Description
Supervisor Password is Displays the setting status of the password of the
supervisor (only displaying).
User Password is Displays the setting status of the password of the user
(only displaying).
Set Supervisor Password up to seven
alphanumeric
characters (A to Z, a
to z, 0 to 9)
Press the Enter key to shift to the password enter screen
for the supervisor.
Set User Password up to seven
alphanumeric
characters (A to Z, a
to z, 0 to 9)
Press the Enter key to shift to the password enter screen
for the user. If you preset “Supervisor Password”, you
cannot set the password.
Password On Boot [Disabled]
Enabled
Sets the Enabled/Disabled status of the password enter at
the time of booting. You need to preset the password for
the supervisor.
If the password for the supervisor is preset and this
option is set to Disabled, BIOS assumes the user is
booting the system.
Option ROM Menu
Mask
[Unmasked]
Masked
Sets the Enabled/Disabled status of the key enter while
expanding Option ROM BIOS.
[ ]: Factory Setting