USERS_GUIDE_1080XD_hw
1-67
The following table includes the functions of each menu.
Menu Parameter Description
Serial Port Select Disable
[System Serial Port ]
Serial Port 1
Sets the port to use the serial console function.
Debug Port Select [Enable]
Disable
Sets if the EFI error output console and the OS debug
console are used or not.
System Serial Port Sets Baud Rate/Console Type/Flow Control used for
System Serial Port.
Serial Port 1 Sets Baud Rate/Console Type/Flow Control used for
Serial Port1.
[ ]: Factory Setting
Note: Serial Port
Each serial port is displayed with the following names from the device manager on
OS.
Serial Port1: COM1
System Serial Port: COM2
You may view two serial ports (COM1, COM2) from various applications including OS or
ESMPRO, but you can only use COM2 (System Serial Port) and you cannot use COM1
(Serial Port1) as it is an internal port.
To Next Page
Loading...
