English - 2
● Be sure to read the following before using the product to use it correctly and safely.
W ARN I N G
Do not apply vibrat ions or shocks t o t he
product.
Do not install t he product to unst able
locat ions or locat ions subj ect t o vibrat ions.
Always ask a t echnician to perform the
inst allation.
Do not connect the cables wit h wet hands.
Ot herwise, it m ay cause an injury or an
elect rical shock.
Do not repair or m odify the product yourself.
Otherwise, it may cause an injury, a re or an
elect rical shock.
I n case of t hunder, do not t ouch t he power
cord. Ot herwise, it m ay cause an elect rical
shock.
Connect the product t o t he correct volt age.
I f the product is connect ed to a volt age ot her
than the specied voltage, it may lead to a
re or an electrical shock.
I n case of a m alfunct ion ( not hing is displayed
on t he screen, etc.) or if sm oke, abnorm al
heat , or a st range sound or odor is generated,
turn t he power off and im m ediat ely ask a
technician or your retailer for repair.
I nst all the product so t hat t he vent s are not
obstruct ed.
Make sure t here are enough people available
to ensure safet y ( at least two people) w hen
inst alling or m oving t he product. Otherwise, it
m ay lead t o an inj ury.
Be sure t o ground t he product. I f the product
is not grounded, there is a risk of electrical
shock in case a m alfunct ion occurs.
I n case foreign m at ter has ent ered into t he
product, im m ediat ely disconnect t he power
supply and stop using t he product.
Aft er t he inst allation, if a problem such as
loose screws occurs, im m ediat ely ask a
technician or your retailer for repair.
Do not put obj ect s into the product.
Otherwise, it may cause a re or an electrical
shock.
I n case the product is in cont act with water
or another liquid, im m ediately disconnect t he
power supply and stop using t he product. I f
you cont inue using t he product in t hat stat e,
it may lead to a malfunction, a re, or an
elect rical shock.
To Next Page
Loading...
