16
Getting Started
Attaching the Battery
Pack
Insert the battery pack in the direction by hooking
the tabs into the slots.
Charging the Battery
1 Connect the microUSB plug of the supplied
microUSB cable with engraved side facing up to
the microUSB connector.
2 Connect the USB plug of the cable with the
supplied AC charger.
3 Insert the AC charger plug into the power outlet.
Note
• When connecting to the microUSB connector of this product,
hold the microUSB plug straight against the connector without
tilting it vertically or horizontally and insert it gently.
■ About the notification LED
Notification LED turns red when charging starts in a state
of battery depletion.
Notification LED turns off when the charging status icon
appears.
Charging with the PC connection
1 Connect the microUSB plug of the supplied
microUSB cable with engraved side facing up.
2 Connect the USB plug of the cable with your PC.
2
3
To Next Page
Loading...
