23
BASIC OPERATION
Sound Adjustment (only when used with the ISS-6020/ISS-6020G Switcher)
Adjust the volume to your preference.
Proceed as follows:
1 Press the OPERATE button.
• The “OPERATE” menu is displayed.
2 Use the CURSOR or button to highlight the “3/SOUND”
line and press ENTER to display the “SOUND” menu. You can
also select the “SOUND” menu directly by pressing the INPUT
“3” button.
3 Use the CURSOR or button to select a sound function and
press ENTER. You can also select an item directoly by pressing
the corresponding number button.
• The sound adjustment screen will be displayed.
Items to select
• VOLUME
• BASS (Not available on XG135LC, XG110LC and XG75A)
• TREBLE (Not available on XG135LC, XG110LC and XG75A)
• BALANCE (Not available on XG135LC, XG110LC and XG75A)
4 Use the CURSOR button to adjust sound controls.
• The CURSOR or button increases the level.
The CURSOR or button decreases the level.
5 To end this adjustment, press the END button.
• Whenever the END button is pressed, the screen changes in this
order:
“SOUND” menu → OPERATE” menu → Source screen.
– OPERATE –
1/
PICTURE
2 / POSITION
3 / SOUND
4 / INPUT SELECT
5 / SOURCE INFO
6 / STATIC
7 / CLOSED CAPTION
8 / TIMER
– SOUND –
1 / VOLUME
2 / BASS
3 / TREBLE
4 / BA LANCE
60%
SOUND
– VOLUME –
NOTE: Volume level is indicated in a red gauge during muting.
To Next Page
Loading...
