NEC NC1200C User Manual

23
3. Projection of Images (Basic Operation)
3-4. Adjusting the position and the size of projected screen
3-4-1. Displaying the test pattern
1
Press the MENU button, or select a test pattern from signal selection buttons (button <1> to <8>).
If you register the test patterns to the signal selection buttons (<1> to <8> buttons), select the test pattern according to
“3-3. Selecting the title of input signal (See page 22)”.
1
2
3
4
5
L
A
M
P
M
E
N
U
E
N
T
E
R
D
O
U
S
E
R
K
E
Y
L
O
C
K
E
X
I
T
I
M
B
6
7
8
2
Press the LEFT/RIGHT button to display “Title Select” on the LCD screen.
3
Press the DOWN button.
The title of the input signal is displayed.
4
Press the LEFT/RIGHT button to display “TEST Pattern” on the LCD screen.
5
Press the DOWN button.
The LCD screen enters the mode where you can select a test pattern.
6
Press the LEFT/RIGHT button.
This switches the test pattern name displayed on the LCD screen.

NEC NC1200C Specifications

General

Brand	NEC
Model	NC1200C
Category	Projector
Language	English