NEC NEAX 7400 ICS - Chapter 1 Introduction to Installation; Manual Purpose and Scope; Reference Manuals for Installation

AD-25182501 CHAPTER 1
Page 1
Revision 1.0.1
CHAPTER 1 INTRODUCTION
1. PURPOSE
This manual explains the installation procedure for the NEAX7400 ICS Model 120 PABX. Before engaging in
installation , the installer is required to confirm materials to be prepared and the site conditions. Thereafter, the
installer should perform each installation step according to the procedures described in Section 2 of Chapter 3.
2. REFERENCE MANUALS
During installation, refer also to the manuals below:
Figure 1-1 Reference Manuals for Installation
CIRCUIT CARD MANUAL
COMMAND DESCRIPTION
CONTENTS OF CUSTOMER DATA
MAINTENANCE PROCEDURE
QUANTITY OF CIRCUIT CARDS
MODULE FACE LAYOUT
MAINTENANCE MANUAL
REFERENCE MANUALS
COMMAND MANUAL
SYSTEM DATA SHEET
CIRCUIT CARD DESCRIPTIONS
CIRCUIT CARD MOUNTING CONDITIONS
SWITCH SETTING OF CIRCUIT CARDS
DESCRIPTION