AD-25182501 CHAPTER 2
Page 5
Revision 1.0.1
2. SYSTEM CONFIGURATIONS
The PABX system provides three kinds of installation methods as follows:
• Floor Standing Installation
• Wall-Mounting Installation
• 19-Inch Rack-Mounting Installation
Examples of system configurations for each installation method are shown in Figures 2-2 to 2-6.
Figure 2-2 1-PIM Configuration for Floor Standing Installation
Note:
The configuration shown applies only to installations which connect to an existing MDF. If the MDFM
and/or BATTM are to be used, only wall-mounting or rack mounting configurations are permitted. Refer
to Figures 002-2 and 003-5 to 003-13.
RACK PARTS
PIM
FRONT
BASE
To Next Page
Loading...
